Home | Products and Services | Links | Contact Us
Canadian and American flags1st National Automation and Technologies Inc.

First in offering a Single Source Solution for all your Automation needs.
   Home

   Products and
 Services
 
 Stamping Press
 Products


 Automation


 Quality Assurance


 Data Acquisition
 and Control


 Maintenance


 Force / Load Test & Control

   Links

   Contact Us


Home / Products and Services / Automation / Inline Feeders
Inline Feeders

Are Bowl Feeders driving you crazy?

In-line Feeders are the solution!

Why settle for 1940's technology when you can easily move up to high tech in-line feeding?

This Patented Technology (US Patent Pending # 60/330607 and Canadian Patent Pending # 2375795) will work on new applications or retrofitted existing bowl feeders.

New! Click here to download a sample In-line Feeder application video.

Right click and select "Save Target As..." or similar.

The In-line Feeder gives you:

  • No mis-oriented parts due to mechanical profiling of the fed component
  • Higher feed rates due to Design Advantage
  • NO jamming under tracks and/or in return pans as these are non-existent
  • Lower purchase cost with comparable equipment
  • NO alignment issues between Bowl and In-Line Feeders as there is ONE integral unit

Some of the industries enjoying the In-Line Feeder:

  • Automotive Parts
  • Cosmetics
  • Pharmaceuticals
  • Food & Packaging

One demo and you'll be sold!

Welcome to the future of In-line Feeders...

Click below for Samples of Parts Fed:

Sample 1

PART: Triple Clip (Bracket)

OBJECTIVE: To Feed and Orient

FEED RATE: 10-20 Parts per minute

Sample 2

PART: Sliders, Plastic

OBJECTIVE: To Feed and Orient

FEED RATE: 110-200 Parts per minute

Sample 3

PART: Ball Stud

OBJECTIVE: To Feed and Orient

FEED RATE: 20-80 Parts per minute

Sample 4

PART: 6" Diameter Metal Stamping

OBJECTIVE: To Feed and Orient

FEED RATE: 10-20 Parts per minute

Sample 5

PART: Shampoo Bottle Lid

OBJECTIVE: To Feed and Orient

FEED RATE: 200-350 Parts per minute

Sample 6

PART: Spout

OBJECTIVE: To Feed and Orient

FEED RATE: 15-20 Parts per minute

Sample 7

PART: Various, no need for powder or other friction reducing agents for the rubber parts

OBJECTIVE: To Feed and Orient

FEED RATE: 100 Parts per minute average

Sample 8

PART: Plastic Lids

OBJECTIVE: To Feed, Orient and Close

FEED RATE: 120-200 Parts per minute

Sample 9

PART: Bearing

OBJECTIVE: To Feed and Orient

FEED RATE: 150 Parts per minute


 

Home | Products and Services | Links | Contact Us

Copyright 2007 NAAT Inc. All Rights Reserved.
Legal Notice