PC - Assembly Monitoring System

The PC-Assembly Monitoring System (PC-AMS) provides the most advanced, state-of-the-art technology developed to date. PC-AMS is another first and is used in multi-ram (non-synchronous) applications. 5, 10, 15 stations or more can all be monitored at the same time. this system has revolutionized multi-spindle monitoring capability and has reduced cost of per ram monitoring by more than 30%. Differential, signature analysis (see below) is the monitoring strategy. The self-teaching PC-AMS takes the values from a master assembly and compares this to each part run through the machine. Easily adjusted, control parameters are set up by the customer and an alarm is given whenever a part is outside of the parameter. The PC-AMS takes its data from force and position sensors provided as part of the total system.

Differential monitoring systems are suited for a wide variety of assembly applications. The ability for the PC-AMS to be used in retrofit applications allows it to be used in many applications. Some of the applications include crimping, staking, riveting, and press fit applications. The PC-AMS detects faults such as tight fit, no part present, loose fit, wrong part, part mis-aligned, full depth exceeded, etc. With our custom software and data acquisition capability, the PC-AMS is the all-around solution to your In-Process assembly applications.

End users of finished goods are demanding that component manufacturers be in control of "bad parts". This allows certification of each component made and verifies that it has been assembled to a master standard. The PC-AMS offers the most advanced solution to any assembly problem.