Products:

Force Gauges - click for Mechanical or Digital	Torque Testers
Test Stands - click for Manual or Motorized	Calipers
Digital Indicators	Pin, Thread and Other Mechanical Gauges
Fastener Test Systems	Torque Sensors
Multi Force and Torque Gauges	Measurement Electronics

Test Stands - Motorized

MV-220
Motorized Vertical Test Stand

MV-220BA (Basic Type)
MV-220AC (Auto Cycle Type)
Max Load: 220 lbs

• One stand for both compression (push) and tension (pull) tests
• Stroke: 16"
• Auto cycle feature
• Optional dynamic and static distance meter available

These motorized test stands offer consistent and reliable testing. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Quick return and Emergency Stop features are also included.

Basic Models: MV-220BA, MV-500BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Auto Cycle Models: MV-220AC, MV-500AC, MV-1100AC
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Specify speed when ordering

Force Gauge Sold Separately

MV-1100/500
High Capacity Motorized Vertical Test Stands

MV-500BA   (Basic Type)
MV-1100AC (Auto Cycle Type)
Max Load:  MV-500/500 lbs,
                   MV-1100/1100 lbs

• One stand for both compression (push) and tension (pull) tests
• Stroke: 16"
• Combination of ball screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
• Test speed mode: fixed (presettable) or adjustable
• Return speed: fixed max. or adjustable
• Auto cycle feature
• Optional dynamic and static distance meter available

These motorized test stands offer consistent and reliable testing. The combination of ball screw system and state of the art brushless motor provides extremely smooth and powerful operation over the entire speed range. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Quick return and Emergency Stop features are also included.

Basic Models: MV-220BA, MV-500BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Auto Cycle Models: MV-220AC, MV-500AC, MV-1100AC
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Specify speed when ordering

Force Gauge Sold Separately

MH-220
Motorized Horizontal Test Stands

MH-220BA (Basic Type)
MH-220AC (Auto Cycle Type)

• Max Load: 220 lbs
• Stroke: 16"
• Optional dynamic and static distance meter available

Imada motorized test stands offer consistent and reliable testing. Our Basic or Auto Cycle models are available in Standard, High, and Low speeds. They accept any of the standard range Imada force gauges and special attachments. Optional dynamic and static distance meters are also available.

Basic Model: MH-220BA
Basic Models have top and bottom travel limits that can be adjusted for a precise range of movement. Set the travel limits, flip the direction switch up to move the cross head up to the top travel limit at the selected speed. Flip the direction switch down to send the cross head down to the bottom travel limit. The speed is set by a Speed Adjust knob. Quick Return and Emergency Stop features are also included.

Auto Cycle Model: MH-220AC
Auto cycle models have top and bottom travel limits that can be adjusted for a precise range of movement. Speed Adjust, Quick Return and Emergency Stop features are also included. These stands have three function modes.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.

Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.

Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Specify speed when ordering

Force Gauge Sold Separately

MVS
Ultra Precision Fully Programmable Force/Distance Touch Panel Tester

• Capacity: up to 220 lbs.
• Force Accuracy: 0.2% F.S.
• Stroke: 100 mm (Optional: 200 or 300 mm)
• Speed: 0.001 mm/sec to 9.999 mm/sec (digitally adjustable)
• Movement Resolution: 0.001 mm increment (by JOG dial)
• Position Repeatability: 0.03 mm (0.015 mm one direction)

The MVS features both force and displacement testing. It accommodates load cells up to 220 lbs and has very precise digital positioning capabilities and a manual JOG dial capable of 0.001 mm increments. The touch screen is the ultimate in programming efficiency. Five screens control Testing, Options, Utility, Settings and Calibration. The MVS is specially designed to test force vs. displacement characteristics including hysteresis analysis of micro-movement test samples such as membrane switches, micro switches, keyboards, etc. It will quickly measure not only compression direction, but also the reverse, decompression, simultaneously. Also, if it is preset, it will indicate the particular force value at the preset distance. Once all of the testing parameters are set, the MVS will perform the uniformly conditioned testing repeatedly. The force and displacement data output in the RS-232C format is available for SPC.

(MVS teststand includes loadcell)

MVS Ranges (Resolution) Accuracy: ±0.2% F.S. ±1 LSD