Home / Products and
Services / Quality Assurance / Calibration Products and Services / Pin, Thread and Other Mechanical Gauges
Pin, Thread and Other Mechanical Gauges
Products:
Pin, Thread and Other Mechanical Gauges
 
 
Black Guard Gages
Black oxide treatment prevents corrosion and shows gage wear… saving money and
time. Make quick and accurate measurements
with Black Guard Pin Gages. Measure hole
sizes. Calculate distances between holes.
Gage slot widths. Check locations. Use for
Go / No-Go gaging. Size in micrometers and snap gages. These gages are a must for anyone
making frequent and varied measurements.
Black Guard
- Prevents Rust & Corrosion
- Visible Wear Indication
- Bright Clear Marking
- Longer Gage Life
Black Guard black oxide treatment typically penetrates .00004" to
.00006" deep, which will visually reveal wear patterns allowing the
inspector to calibrate or replace gage pins more effectively. Black
Guard treatment will help prevent rust and corrosion which will extend
the useful life of the gage.
Inch Sets (.001" Increments)
|
Range |
No. of |
Wt. |
Order No. |
Order No. |
Price |
Replacement |
| |
Gages |
lbs. |
(Plus) |
(Minus) |
|
Pin Price |
| |
|
|
|
|
|
|
|
.0060" to .0600" |
55 |
2 |
901100100 |
901200100 |
$75.00 |
$2.50 |
|
.0110" to .0600" |
50 |
2 |
901100200 |
901200200 |
$60.00 |
$2.50 |
|
.0110" to .2500" |
240 |
6 |
901100300 |
901200300 |
$190.00 |
$2.25 |
|
.0610" to .2500" |
190 |
6 |
901100400 |
901200400 |
$135.00 |
$2.25 |
|
.2510" to .5000" |
250 |
20 |
901100500 |
901200600 |
$200.00 |
$2.25 |
|
.5010" to .6250" |
125 |
21 |
901100600 |
901200600 |
$235.00 |
$3.00 |
|
.6260" to .7500" |
125 |
31 |
901100700 |
901200700 |
$260.00 |
$4.50 |
|
.7510" to .8320" |
82 |
27 |
901100800 |
901200800 |
$450.00 |
$6.75 |
|
.8330" to .9160" |
84 |
33 |
901100900 |
901200900 |
$525.00 |
$7.75 |
|
.9170" to 1.0000" |
84 |
38 |
901101000 |
901201000 |
$550.00 |
$8.25 |
- Class ZZ ( .0002" or .005 mm tolerance)
- Go (Plus) or NoGo (Minus)
- NIST traceable
- .0005", or .02mm sizes
- .001" or .02mm set increments
- 52100 tool steel; 60/62 Rc
- 2" long
- 10 microinch finish or better
- Within .0001" round
- Marked with size & direction of tolerance on gages over .060"
- Certificate of Accuracy included
- Registered ISO 9002
|
