Slug Detection

MICRON

A Cost Effective Solution for:

Slug Detection Stroke Deviation	Changes in Material Thickness Bed to Ram Parallelism	Micron base unit with 2 additional channels
Features:
Easy to use, limits are set automatically Accuracy to .00004 inches Monitoring speeds to 2500 strokes per minute	Expandable to 8 individual channels No machine calibration or adjustment required Designed for use in harsh environments

Utilizing automatic sampling and adaptive learn techniques, the Micron monitors the separation gap between the press slide and die. Micron interfaces with the MIC-R high frequency sensor mounted on the stripper plate, lower die or other stationary die component. accurate to .00004 inches at speeds up to 2500 strokes per minute, Micron activates your machine stop circuit if pre-set high or low limit is exceeded. No machine calibration or external timing sensor is required.

Specifications
Power Requirement:	115 vac ±10%.
Power Consumption:	30 watts.
Output Contacts:	NO-NC, 250 vac 5A rating.
Response Time:	Less than 10Msec.
Operating Speed:	Up to 2500 SPM.
Repeatability:	To .00004 inches.
Operating Temperature:	-10° to 50° C.
Alarm Adjustment:	±99 Microns.
Sensor Type:	Proximity 200 KHz.
Maximum Sensing Distance:	.1 inch (2.5mm).
Enclosure Size:	Base 8.25"w x 9.50"d x 3.25"h. Stack 8.25"w x 9.50"d x 4.75"h.

HMIC-B Base with 3 additional channels